1. Feature
High Speed, Reliable and High Cost-performance Ratio.
D-T30 CNC turret punching press machine , stable, reliable and easy for operation and maintenances
Independently developed CNC system, which will be upgraded periodically, and allow automatic conversion and punching from AutoCAD.
Automatic reposition function, better for large volume production.
Control unit: the industrial integration PC, shockproof, suitable for anti-jamming workstation work environments.
Inserted-sleeve Turret ensuing axiality of upper and down punching die as well as long usage life
Electric and Pneumatic are famous brand
linear guide way and precision ball screw.
Table surface with nylon brushes and balls
O type press house, weld structure, stress relief annealed.
Automatic protection for the Clamps.
Centralized lubricating system
Die station allocated as same as AMADA
Position Size(mm) T-30
A φ1.5-φ12.7 14
B φ12.7-φ31.8 12
C φ31.8-φ50.8 2
D φ50.8-φ88.9 2
Standard Accessories:
One sets of dies,
Sizing Block 6 pcs
Pedal switch 1 pcs
General tool 1 set
Spare Parts
Ball/brush for table surface, Seals, Friction Plate and Toothed Plate
2.Specification
Punching Capacity KN 300
Max. sheet size mm 1250×5000
Max. Sheet weight kg 120
Max. thickness mm 6.35
Max. punching Dia. In a hit mm 88.9
Die Station 30
Distance accuracy between holes ±0.1 mm
Rate Hit rate HPM 280
Max. Feeding Speed m/min 80
4-Axis Controlled X-Axis, Y-Axis ,Z-Axis and T
Lubrication Automatic
Pneumatic Clamps 2
Standard punching dies, the same AMADA
Life Cycle of punching Die 500,000.00 hits
Power Supply KW 14
Pneumatic pressure MPa 0.55
Overall Size mm 5000×4000×2100
Note: CNC Hydraulic Turret Punch Press is available too.
3. Technical Detail
One. The main technical parameters
NO. Parameter Unit T30
1 Nominal force KN 300
2 Processing sheet size Mm 1250×5000
3 Max thickness Mm 6.35
4 Punching a maximum diameter Mm Φ88.9
5 Median die 30
6 Two adjacent holes pitch accuracy Mm ±0.10
7 Sheet maximum speed m/min 80
8 Slider trips hit/min 280
9 Die life million time 50
10 CNC system D-T11
11 Air pressure Mpa 0.55
12 Total power kW 14
13 Body structure width 480MM closed
Two. Main features
(one), the protection function:
1 clamp stamping protected area when rushed clamp, clamps will automatically avoid
2 Tonnage overrun protection, when the pressure exceeds the set punch tonnage, the insurance will be installed inside ,the block off and stop punching,Avoid pressing too large for bed deformation
3 Pick-up protection, when the stamping process, if the mould with height up to 20 mm, the device will automatically stop, avoid the damage to the fuselage, mold and sheet metal
4 Overrun protection, when go to the limit after will automatically stop motion, avoid a collision
5 Air pressure protection, alarm and stop working when air pressure is too low, to avoid damage to the clutch
6 Voltage protection function, when the voltage fluctuation is too big, can automatic alarm and stop the work, to avoid damage the servo system, electrical components and software program
7 Lubrication protection, equipment for automatic lubrication, when the failure will alarm, remind staff to check repair oil
(two) the turret is made of 40Cr; using German mosaic roulette, long oriented Amada mold, precise positioning.
(Three), using the O-type closed body, tempered by two times, so that the complete elimination of stress
(Four) imported clutch, more stable performance, more than three times higher than domestic life
(Five) carriage and beam integrated design, accurate positioning, moving more smoothly, to eliminate the X, Y-axis dynamic offset case
(Six), the system can automatically collect, to select the most suitable mold processing, and display time stamping, processing capacity, die life (punches), etc.
(Seven), the use of floating pneumatic clamp, integral dovetail carriage, holding capacity, smooth feeding; easy to move
Three. The main component parts list
Name Model Supplier
1, the linear guide HGW35CA Taiwan TBI
2, ball (large lead) SFSR04040BIDGC5 Taiwan TBI
3, the control unit IEI Taiwan
4, servo motors, drives Panasonic
5, FRL AirTAC
6, coupling Taiwan Jian Xiang
7, reducer MF×150 Taiwan VGM
8, the solenoid valve AirTAC
9, the magnetic switch
10 gauge with switch
11, the cylinder
12, the NC system Big East NC
13, the power module Taiwan Ming Wei Company
14, the clutch KB-400-1 Italy OMPI
15, the circuit breaker Schneider
16, the contactor Schneider
17, proximity switches Taiwan Riko
Four. CNC system features and functions.
1 simple international generic G code programming, easy operation
2 internationally accepted standard RS232 interface to facilitate communication with the computer
3 strip protection, when the stamping process, if the height of the strip because of mold 20MM, the device will automatically shut down, To avoid damaging the fuselage, molds and sheet metal
4 overrun protection, the trip came when the limit will automatically stop the movement, to avoid collision
5 the protection of self-diagnosis function, when the software, system or electrical failure will automatically alarm to alert inspection and exclusion
6 Pressure protection function, when the pressure is too low will alarm and stop working to avoid damage to the clutch
7 voltage protection function, when the voltage fluctuation is too large, it will alarm and stop working to avoid damage to the servo system, electrical Components and software programs
8 lubrication protection, automatic lubrication equipment, when a fault occurs it will alarm to alert maintenance staff to check the oil
9 stamping capabilities with a graphical simulation to facilitate system parameters of configration
10 backup ladder and processing procedures, and to run a large capacity program online processing
11 units of nano interpolation, position detection and servo control, high-speed precision machining
12 high degree of integration, the use of special software; start time is short, it will automatically save the data when a sudden power failure
13 Has mold compensation
14 with pitch compensation
15 with backlash compensation
16 Has coordinates offset function
17. Has re-positioning function